FDG1000on Site Portable Facing Milling Machine
FDG1000 Flange Face Machining Portable Assembly operation video
FDG1000 portable flange processing machine is mainly used for various types of sealing surfaces (RF, RTJ, M, F, RF, etc.) and elliptical surface processing of flanges such as inner hole, outer circle, end face and convex groove. The machine is installed by means of internal card clamping. The equipment is equipped with two sets of base support devices. Before use, please confirm the diameter of the flange to bemachined and select the most suitable chassis for clamping.
Modular design concept, which can realize quick installation and disassembly
All bearings adopt NSK high-precision and heavy-duty bearings to ensure stable operation and no vibration;
High-precision turbine drive mechanism ensures horizontal, inverted and vertical installation of the machine;
Automatic feed in radial and vertical direction, or manual feed;
inner diameter chuck can be adjusted up and down, there are 8 supportpoints, the card is firm;
spindle speed between 0-25RPM stepless speed regulation, constant torque output to ensure smooth processing;
multi-gear adjustment is the most suitable feed speed for the whole cutting output, which ensures the efficiency and precision of roughing and finishing;
The knife holder can rotate around 45°, and can also add auxiliary tool holder toincrease the processing stroke;
equipped with remote control box, easy to operate, high safety factor;
Facing Diameter Range | 150-1000mm（6-40"） |
I.D Clamp Range | 150-1000mm(6-40") |
Min Swing Diameter | 1610mm |
Tool Post Stroke | 100(4") |
Tool Post Swivel Angle | + / - 30⁰ |
R.P.M | 0-35 |
Drive Power Unit- Pneumatic | 2.2Hp(1.7kw) |
Air Consumption / Supply Required | 1.93m³/min |
Machine Weight | 128Kg |
Shipping Weight | 145Kg |
In | Out | Up/down | |||
Gear | mm/rev | Gear | mm/rev | Gear | mm/rev |
1 | 0.128 | 1 | 0.151 | 1 | 0.03 |
2 | 0.251 | 2 | 0.292 | 2 | 0.06 |
3 | 0.591 | 3 | 0.691 | 3 | 0.15 |