Medical Protective Equipment N95 Mask
Wholesale Face Mask Making Machine Protect Cup Kn95/N95 Mask Machine
7. It adopt 15K 3000w High strength performance ultrasonic wave to control therm-compression.On off pressure mechanism to be equipped both mold roller and ultrasonic wave die haead are simple to operate.
8. Die cutting forming section adopt Japan servo motor and Japan precision reducer to control the die cutting precision
9. Pulling material and conveying section adopt Japan Omron serve motor adding Japan presion reducer to contorl material feeding precision.
10. Nose bridge bar device adopt Japan Omron dual-serve motor to control its fixed length feeding clipping and pulling.
11. The complete machine running, die cutting thermal positioning and high presicion nose bridge bar are to be controlled by Japan Omron motion control system with touch screen and human-machine interface
12. High pressure air suction device ensure stable and smooth wasting off. Finished products feed into counting conveyor smoothly and steadily through negative pressure air suction flat belt, during the production equipped with stacking and counting alarm device.
|Max production speed||90pcs/min|
|Stable production capacity||40-60pcs/min|
|Main motor power||1.5kw|
|Time setting range||0-9999s|
|Face mask shape||Standard is KN95/N95|
|Face mask type||Built-in nose bridge|
1. Cutting roller
We use the chrome steel to cover the rubber roller both sides .So that the rubber is not crack from side after extended periods use.
2. Traction roller
We use the silicone rubber materials instead of the butyronitrile materials .The silicone rubber materials is good abrasion resistance and will not crack
3. PLC touch screen
We use DELTA group brand PLC touch screen .
4. Mask nose strip tension controller
We use Mask nose strip tension controller .This device can avoid the nose strip differ in length .
5. Nose strip straight- feeding device
We use Nose strip straight- feeding device , It can ensure the nose strip be feeded straightly in the processing, so the finished mask will be flat and artistic.
7. Non woven raw materials sensors
We use Non woven raw materials sensors,once the raw materials use up,machine will stop automatically
8. Raw materials tension controller 1
We use the Raw materials tension controller to avoid the materials plugging .
9. Raw materials tension controller 2
Our machine is equipped with two braking ways . One is belts pressing and another is screw fixing . You could choose either one or use both according to your need.
10. Raw materials EPC device
We use raw materials EPC device ,to do materials adjustment.
11. Machine door lock
We just door lock ,with out the key,worker can not start the machine.
12. Frequency converter
We use DELTA group brand frequency converter .
13. Machine body and materials feeding connect board,We connect Machine body and material feeding frame with connecting boards,so that the running of whole machine will be very stable.
14. Electrostatic eliminator
In our machine we have one electrostatic eliminator . to eliminate non woven mask surface static.
15. Machine motor
Our geared motor is new type and no need refuel.
We install the fan near the ultrasonic horn ,to Lower the horn temperatures,to to extend ultrasonic life.
If you want more information, pls contact us.