Portable Line Mills In Situ Tools

LMD2000 China Gantry Milling Hydraulic Portable
PRODUCT DESCRIPTION:
One device, two processing modes, you can flexibly switch between line milling and gantry milling processing modes according to field working conditions and on site machining requirements.
LMD2000 Gantry Milling | |
X Axis(Bed) Stroke:2000mm | |
Y Axis(Arm) Stroke – Standard:1000mm | |
Spindle Head Taper:NT40 or NT50 | |
Maximum Cutter Diameter:160mm(NT40) or 250mm(NT50) | |
Electric::Heavy Duty Electric Feed | |
Feed Rate:35-750mm/min | |
Spindle R.P.M.:0-740 | |
Hydraulic :20L/min |
Operating Procedure:
1. The work should be clamped with pressure plate, screw or special tool. Do not use the general wrench casing, so as not to slip people. |
2. The cutting tool must be clamped, otherwise it is not allowed to work. |
3. Before working, check the running condition of the transmission part of the machine tool, and install the baffle of the machine tool, then the machine tool can run. |
4. When milling various parts, especially rough milling, start with slow cutting. |
5. Loosen the fixing screws before moving the worktable and tool holder. |
6. When handling knives, use a copper hammer or mallet to strike lightly to prevent flying fragments of the knives from injuring people. |
7. During cutting, do not change the speed or adjust the cutting tool, and do not touch or measure the workpiece by hand. |
Joysung Gantry Portable Milling Machine. Used in chemical industry, wind power, water power, petroleum, mineral industry. Sophisticated equipment, high quality, low price. That can help you with any problem you might have.
OUR FACTORIES AND EQUIPMENT:
OUR WORKSHOP:
OUR WORK FLOW:

For more information, please contact us | |
| ![]() |
| |
|